Assigning a Decoder to an Existing Station

To swap a decoder in the NLP, assign a decoder to an existing station.

Note: The NLP can accommodate all Tucor decoders, including the auto-discovered NG Series. Decoders are added/discovered then assigned to a station.

1. Navigate to   → Irrigation controller → Stations
2. Find the station you wish to assign decoder to
3. Click
4. Under the IO dropdown, search for the decoder address you wish to add
5. Click SAVE

To add a new decoder to the controller, use this link:

Adding an NG Decoder to the NLP

To assign a decoder to a new station, use this link:

Assigning a Decoder to a New Station